reflective multifoil insulation

Multifoil insulation

 

ACTIS thin multifoil insulation products are made up of multi-layered reflective films sewn with foams to form thin insulation blankets

 

BOOST'R HYBRID

BOOST'R HYBRID

Insulating breather membrane
HCONTROL HYBRID

HCONTROL HYBRID

Multifoil insulation with built in vapour control
HCONTROL REFLEX+

HCONTROL REFLEX+

Reflector vapour barrier and additional insulation
TRISO-SOLS

TRISO-SOLS

A thin insulation product for maximum thermal efficiency and minimum thickness. Ideal for renovation of existing floors.

Benefits

Fully certified: CE marked and under technical approval

HCONTROL REFLEX+ has a CE Mark in accordance
with EN 13984 and is BBA and VTT certified.

Vapour Barrier

With a Z-value > 1000 MNs/g, Sd > 200m,
HCONTROL HYBRID blocks water vapour diffusion through the fabric of the building,
thus preventing 
any risk of condensation.

Airtight

HCONTROL REFLEX+ is completely airtight (tested by VTT to EN 12114)
it acts as a barrier against cold air infiltration and stops warm air escaping from the building.

Reflective

HCONTROL REFLEX+ reflects up to 95% of the thermal radiation
emitted from inside the building back to its source,
for optimum thermal comfort.

Supplementary insulation

Due to its significant core thermal resistance and its very low emissivity,
HCONTROL REFLEX+ also provides appreciable supplementary thermal insulation
which allows the thickness of insulation required to be reduced.

Water vapour resistance

Because it is water vapour resistant, HCONTROL REFLEX+ prevents water vapour diffusion through the fabric of the building.
Ventilation systems ensure the renewal of the air within the building.
The surface of HCONTROL REFLEX+ is protected against corrosion by a nitro-cellulose varnish.

Thermal performances

Timber frame wall


Pitched roof


Properties

Air permeability
Airtight
Diffusion eq. air layer thickness (Sd)
> 100 m
Watertightness
Waterlight (W1)
Vapour resistance (Z)
> 900 MNs/g
Thermal conductivity (RD)
0.25 m².K/W
Declared emissivity after ageing
0.05
Packaging
Roll
Area
20 m² / roll
Width
1.6 m
Length
12.5 m
Thickness
8.5 mm

Certificates & DOP

HCONTROL REFLEX+ BBA CERTIFICATE FLOOR

HCONTROL REFLEX+ BBA CERTIFICATE FLOOR

HCONTROL REFLEX+ BBA CERTIFICATE ROOF

HCONTROL REFLEX+ BBA CERTIFICATE ROOF

HCONTROL REFLEX+ BBA CERTIFICATE WALL

HCONTROL REFLEX+ BBA CERTIFICATE WALL

UK DOP HCONTROL REFLEX +

UK DOP HCONTROL REFLEX +

Accessories

ACTIS Cutter

ACTIS Cutter

Cutter for reflective insulation
ACTIS Cutter blades

ACTIS Cutter blades

Set of 10 spare blades
ISODHESIF Tape

ISODHESIF Tape

Tape for reflective insulation with copper or metalized face
MULTIFOIL INSULATION

ACTIS thin multifoil insulation products are three to five times thinner than traditional thick insulation but performs to the same standard. They are easy to install and are perfectly adapted for both new or refurbishment projects.

 

Our range